Cookie Control

We would like to use cookies to store information on your computer, to improve our website. One of the cookies we use is essential for parts of the site to operate and has already been set. You may delete and block all cookies from this site, but parts of the site will not work. To find out more about the cookies we use and how to delete them, see our privacy policy.

Products | Multi function robot

The Garbuio Dickinson unwrapping robot uses a standard anthropomorphic robot with 500 kg net load handling capacity. The robot is fitted with a carton clamping unit designed by Garbuio Dickinson.

Handling Robot

A single robot, assisted by one single operator, will handle up to 70-75 c/h max, meaning one robot unit is sufficient for both Burley and Virginia lines.

The robot capacity means that it is suitable for C48 cartons with 200 kg and has a robot action range of 3500mm - 2300mm. In addition to this the compressed air pressure is set at 6 bar.

The clamping unit is made from welded and painted carbon steel sheet. The clamping unit carries the primary and secondary clamping systems which are both pneumatically activated. The secondary clamping unit brackets are fitted with pins that are designed to penetrate the carton side walls.

The unit consists of the following systems:

  • Carton receiving forks (two)
  • Carton retention plate
  • Lids push out
  • Rotating base frame
  • Pusher and release rail
  • Support frame


ITALY Contact

Tel: +39 0422 431 140
Fax: +39 0422 431 153

UK Contact

Tel: +44 (0)1962 842222
Fax: +44 (0)1962 840567

USA Contact

Tel: 001 804 279 0020
Fax: 001 804 279 0025


Tel: +86 21 5113 0380
Fax: +86 21 5113 0379